Integrator Notes
Field card 007, Sonos Amp: UNPLUG · HOLD JOIN + PLUG IN, ORANGE/WHITE → RELEASE, GREEN = READY
A4 · PDF · prints in black and white Open full size
SonosFactory resetCard 007

Sonos Amp

Factory reset (hold Join while plugging in)

Bench check pending

Written from official documentation and dealer sources, not yet run on our bench. Confirm on your hardware before a reset you can't undo.

The sequence

  1. UNPLUG · HOLD JOIN + PLUG IN
  2. ORANGE/WHITE → RELEASE
  3. GREEN = READY

Good to know

  • No JOIN button: hold PLAY/PAUSE or MUTE instead
  • Era 100 / 300 · Arc Ultra · Beam Ultra: hold BLUETOOTH
  • Sonos app › Settings › Add Speaker or Component
Download PDF Print
Previous · No. 006RJ45 plug · Cat6 · T568B

More Sonos

  • Field card 017: Era 100 · Era 300 · Arc Ultra
    No. 017SonosFactory reset

    Era 100 · Era 300 · Arc Ultra

    Factory reset (hold Bluetooth while plugging in)

    1. UNPLUG · HOLD BLUETOOTH + PLUG IN
    2. ORANGE/WHITE → RELEASE
    3. GREEN = READY
    Bench check pending
  • Field card 001: In-wall dimmer · switch · keypad
    No. 001Control4Factory reset

    In-wall dimmer · switch · keypad

    Leave the Zigbee mesh and reset (13-4-13)

    1. Tap the TOP button 13×
    2. Tap the BOTTOM button 4×
    3. Tap the TOP button 13×
    Bench check pending
  • Field card 003: SR-260 system remote
    No. 003Control4Factory reset

    SR-260 system remote

    Factory reset and leave Zigbee

    1. Press ROOM OFF
    2. Then # and *
    3. Then 1 · 3 · 4 · 1 · 3
    Bench check pending
Download PDF